Handbook home
Structural Theory and Design (CVEN30009)
Undergraduate level 3Points: 12.5On Campus (Parkville)
To learn more, visit 2023 Course and subject delivery.
About this subject
- Overview
- Eligibility and requirements
- Assessment
- Dates and times
- Further information
- Timetable(opens in new window)
Contact information
Semester 2
Xuemei Liu
email: xuemei.liu@unimelb.edu.au
Overview
Availability | Semester 2 |
---|---|
Fees | Look up fees |
AIMS
This subject introduces the basic methods of structural analysis and the design of simple structures which are built of reinforced concrete, steel, timber and masonry. A feature of this subject is the integration of the design and analytical skills in dealing with contemporary structures that have an effective blending of materials for achieving satisfactory performance and economy in construction.
This subject consolidates basic structural theory and design abilities that underpin further specialised studies in structural design in engineering masters programs. It also gives students some basic capabilities to seek work experience in the engineering profession.
INDICATIVE CONTENT
Topics covered include: stress analysis in beams, deflection calculations using direct integration and virtual work methods, structural analyses of beams and frames by the force method, structural design of reinforced concrete beams and columns, structural design of steel beams, columns and ties, design of timber joists and masonry squat walls.
Intended learning outcomes
INTENDED LEARNING OUTCOMES (ILO)
On completion of this subject the student is expected to:
- Analyse stresses in beams due to combined axial, bending and torsional loads
- Calculate deflections in beams by numerical integration methods and unit load method
- Calculate deflections in frames by unit load method
- Conduct stability analysis of simple systems including the buckling of columns and stress amplifications
- Analyse using the force method for solving indeterminate systems of beams and frames
- Design steel beams, columns and ties
- Design reinforced concrete one-way slabs, simple beams and compression-only columns, and basic detailing
- Design timber joists and masonry squat walls
- Design simple structural systems taking into account the design load cases.
Generic skills
Students successfully completing this subject should develop the following general skills:
- Ability to apply knowledge of science and engineering fundamentals
- Ability to undertake problem identification, formulation, and solution
- Ability to utilise a systems approach to complex problems and to design and operational performance
- Proficiency in engineering design
- Ability to conduct an engineering project
- Ability to communicate effectively, with the engineering team and with the community at large
- Ability to manage information and documentation
- Capacity for creativity and innovation
- Understanding of professional and ethical responsibilities, and commitment to them
- Ability to function effectively as an individual and in multidisciplinary and multicultural teams, as a team leader or manager as well as an effective team member
- Capacity for lifelong learning and professional development.
Last updated: 11 April 2024
Eligibility and requirements
Prerequisites
Students must meet one of the following prerequisite options:
Option 1
Code | Name | Teaching period | Credit Points |
---|---|---|---|
ENGR20004 | Engineering Mechanics |
Semester 1 (On Campus - Parkville)
Semester 2 (On Campus - Parkville)
|
12.5 |
AND
Note: the following subject/s can also be taken concurrently (at the same time)
Code | Name | Teaching period | Credit Points |
---|---|---|---|
ENGR20003 | Engineering Materials and Mechanics | Semester 2 (On Campus - Parkville) |
12.5 |
Option 2
Admission into or selection of one of the following:
- MC-CIVENG Master of Civil Engineering
- MC-SOFTENG Master of Software Engineering
Corequisites
None
Non-allowed subjects
None
Inherent requirements (core participation requirements)
The University of Melbourne is committed to providing students with reasonable adjustments to assessment and participation under the Disability Standards for Education (2005), and the Assessment and Results Policy (MPF1326). Students are expected to meet the core participation requirements for their course. These can be viewed under Entry and Participation Requirements for the course outlines in the Handbook.
Further details on how to seek academic adjustments can be found on the Student Equity and Disability Support website: http://services.unimelb.edu.au/student-equity/home
Last updated: 11 April 2024
Assessment
Description | Timing | Percentage |
---|---|---|
Two 1000 word design assignments (10% and 5%, total of 15%) (per student) in groups of 3 students, due Weeks 9 and 10. Intended Learning Outcomes (ILOs) 2, 4, 6, 7 and 9 are addressed in this assignment
| From Week 9 to Week 10 | 15% |
Three x 250 word laboratory reports (5% each, total of 15%) (per student) to be completed individually, each lab report requiring approximately 5 hours of work. ILOs 1, 2, 5 and 7 are addressed in the four laboratory reports
| Throughout the teaching period | 15% |
One examination. ILOs 1 to 8 are addressed in the examination
| End of semester | 70% |
Last updated: 11 April 2024
Dates & times
- Semester 2
Coordinator Xuemei Liu Mode of delivery On Campus (Parkville) Contact hours 50 hours (Lectures: 36 hours per semester; Laboratory/Tutorial/Design workshops: 14 hours per semester) Total time commitment 170 hours Teaching period 24 July 2023 to 22 October 2023 Last self-enrol date 4 August 2023 Census date 31 August 2023 Last date to withdraw without fail 22 September 2023 Assessment period ends 17 November 2023 Semester 2 contact information
Xuemei Liu
email: xuemei.liu@unimelb.edu.au
Time commitment details
170 hours
What do these dates mean
Visit this webpage to find out about these key dates, including how they impact on:
- Your tuition fees, academic transcript and statements.
- And for Commonwealth Supported students, your:
- Student Learning Entitlement. This applies to all students enrolled in a Commonwealth Supported Place (CSP).
Subjects withdrawn after the census date (including up to the ‘last day to withdraw without fail’) count toward the Student Learning Entitlement.
Last updated: 11 April 2024
Further information
- Texts
Prescribed texts
None
- Subject notes
LEARNING AND TEACHING METHODS
The subject will be delivered through a combination of lectures and tutorials. In addition, students will undertake miniature experiments to reinforce materials covered in the lectures and also a design exercise which involves applying the learnt techniques in solving problems that are likely to be encountered in practice.
INDICATIVE KEY LEARNING RESOURCES
Students will have access to lecture slides, recommended reading materials. The subject LMS site also contain worked solutions for all tutorial problems.
CAREERS / INDUSTRY LINKS
Senior practising engineers from industry will deliver some of the lectures and case studies with focus on typical industry design considerations.
Having completed this unit, students will acquire skills to design and analyse simple structures. - Related Handbook entries
This subject contributes to the following:
Type Name Course Master of Architectural Engineering Informal specialisation Science Discipline subjects - new generation B-SCI Major Engineering Systems Informal specialisation Environments Discipline subjects Major Civil Engineering Systems Major Civil Engineering Systems Informal specialisation Bachelor of Design Elective Subjects Specialisation (formal) Civil with Business Specialisation (formal) Civil Specialisation (formal) Structural - Breadth options
This subject is available as breadth in the following courses:
- Bachelor of Arts
- Bachelor of Commerce
- Bachelor of Design
- Bachelor of Fine Arts (Acting)
- Bachelor of Fine Arts (Animation)
- Bachelor of Fine Arts (Dance)
- Bachelor of Fine Arts (Film and Television)
- Bachelor of Fine Arts (Music Theatre)
- Bachelor of Fine Arts (Production)
- Bachelor of Fine Arts (Screenwriting)
- Bachelor of Fine Arts (Theatre)
- Bachelor of Fine Arts (Visual Art)
- Available through the Community Access Program
About the Community Access Program (CAP)
This subject is available through the Community Access Program (also called Single Subject Studies) which allows you to enrol in single subjects offered by the University of Melbourne, without the commitment required to complete a whole degree.
Entry requirements including prerequisites may apply. Please refer to the CAP applications page for further information.
Additional information for this subject
Subject coordinator approval required
- Available to Study Abroad and/or Study Exchange Students
This subject is available to students studying at the University from eligible overseas institutions on exchange and study abroad. Students are required to satisfy any listed requirements, such as pre- and co-requisites, for enrolment in the subject.
Last updated: 11 April 2024