Material and Energy Balances (CHEN20010)
Undergraduate level 2Points: 12.5On Campus (Parkville)
About this subject
Contact information
Semester 1
Prof David Shallcross
Semester 2
Prof David Shallcross
Overview
Availability | Semester 1 Semester 2 |
---|---|
Fees | Look up fees |
AIMS
This subject introduces chemical engineering flow sheet calculations, including material balances, energy balances and compositions of mixtures. The concept of conversion of mass is developed as the basis for determining mass flows in chemical processing systems involving chemical reactions and separation systems. Then the concept of conservation of energy is developed as the basis for determining energy flows in and around chemical processing systems, evaluation of enthalpy changes with and without phase change, simplified energy balances for batch, steady-state and adiabatic systems, estimation of heats of reaction, combustion, solution and dilution, energy balances in reacting systems, simultaneous material and energy balances.
This subject provides the basis for all the chemical engineering subjects that follow. The calculations introduced in this subject are the most common type of calculations performed by professional chemical engineers working in all sectors of industry.
The teaching of process safety is critical to any undergraduate chemical engineering program. Students need to understand their responsibilities to themselves, their work colleagues and the wider community. They need to be aware of safe practices and also the consequences that may arise when those safe practices are not followed. This subject introduces students to concepts of process safety and the consequences when safety management systems fail.
INDICATIVE CONTENT
Topics covered include material balances around single process units and groups of units, involving simple systems and recycle streams, and non-reacting and reacting systems. Total, component, and elemental balances are covered. Other topics include systems of units and unit conversion, and compositions of mixtures.
Energy balances: The concepts of energy, work and heat, the units of energy, internal energy, enthalpy, heat capacity, latent heat, evaluation of enthalpy changes. The general energy balance equation, enthalpy balances, system boundaries. Enthalpies of pure components and selection of enthalpy data conditions.
Energy balances and chemical reactions: Heat of reaction, definitions of standard heat of reaction, standard heat of formation, standard heat of combustion. Hess' Law of adding stoichiometric equations. Adiabatic reaction temperature. Heats of solutions and dilution, and use of enthalpy-concentration charts. Simultaneous material and energy balances.
Safety case studies, safe practices, personal and process safety.
Intended learning outcomes
INTENDED LEARNING OUTCOMES (ILOs)
On completion of this subject the student is expected to:
- Apply knowledge of basic science and engineering fundamentals to solve material and energy balances
- Be able to model material and energy flows around reacting chemical systems
- Define and scope engineering problems and formulate suitable strategies for problem solution
- Have developed an appreciation for the importance of safety in the process industries.
Generic skills
- Ability to apply knowledge of basic science and engineering fundamentals
- Ability to undertake problem identification, formulation and solution
- Ability to utilise a systems approach to design and operational performance.
Last updated: 14 March 2025
Eligibility and requirements
Prerequisites
Code | Name | Teaching period | Credit Points |
---|---|---|---|
ENGR10004 | Engineering Systems Design 1 |
Semester 1 (On Campus - Parkville)
Semester 2 (On Campus - Parkville)
|
12.5 |
AND ONE OF:
- MAST10019 - Calculus Extension Studies
Code | Name | Teaching period | Credit Points |
---|---|---|---|
MAST10009 | Accelerated Mathematics 2 | Semester 2 (On Campus - Parkville) |
12.5 |
MAST10006 | Calculus 2 |
Semester 2 (On Campus - Parkville)
Semester 1 (On Campus - Parkville)
|
12.5 |
AND ONE OF:
Code | Name | Teaching period | Credit Points |
---|---|---|---|
CHEM10003 | Chemistry 1 |
Semester 2 (On Campus - Parkville)
Semester 1 (On Campus - Parkville)
|
12.5 |
CHEM10006 | Chemistry for Biomedicine | Semester 1 (On Campus - Parkville) |
12.5 |
OR
Be enrolled in one of the following courses:
MC-ENG Master of Engineering (Biochemical)
MC-ENG Master of Engineering (Chemical)
MC-ENG Master of Engineering (Chemical with Business)
Corequisites
None
Non-allowed subjects
CHEN20007 CHEN20008
Inherent requirements (core participation requirements)
The University of Melbourne is committed to providing students with reasonable adjustments to assessment and participation under the Disability Standards for Education (2005), and the Assessment and Results Policy (MPF1326). Students are expected to meet the core participation requirements for their course. These can be viewed under Entry and Participation Requirements for the course outlines in the Handbook.
Further details on how to seek academic adjustments can be found on the Student Equity and Disability Support website: http://services.unimelb.edu.au/student-equity/home
Last updated: 14 March 2025
Assessment
Additional details
- One team based presentation with 3 to 4 team members of approximately 15 to 20 minutes, requiring 8 to 10 hours of work (10%). Intended Learning Outcomes (ILOs) 1, 3 and 4 are addressed in this activity. Assessed weeks 5 to 7
- Attendance and participation in two laboratory classes each with a written assignment of approximately 1000 words each requiring 10 to 12 hours of work including preparation (20% - 10% each). ILO’s 1 to 4 are addressed in these activities. Assessed weeks 6 to 11
- One written 3-hours closed book examination (70%). ILO’s 1 to 4 are addressed in the exam. The examination must be passed to pass the subject. Held end of semester examination period.
Last updated: 14 March 2025
Dates & times
- Semester 1
Principal coordinator David Shallcross Mode of delivery On Campus (Parkville) Contact hours 36 x one hour lectures, 11 x two hour tutorials/workshops and 2 x three hour laboratory classes Total time commitment 170 hours Teaching period 26 February 2018 to 27 May 2018 Last self-enrol date 9 March 2018 Census date 31 March 2018 Last date to withdraw without fail 4 May 2018 Assessment period ends 22 June 2018 Semester 1 contact information
Prof David Shallcross
- Semester 2
Principal coordinator David Shallcross Mode of delivery On Campus (Parkville) Contact hours 36 x one hour lectures, 11 x two hour tutorials/workshops and 2 x three hour laboratory classes Total time commitment 170 hours Teaching period 23 July 2018 to 21 October 2018 Last self-enrol date 3 August 2018 Census date 31 August 2018 Last date to withdraw without fail 21 September 2018 Assessment period ends 16 November 2018 Semester 2 contact information
Prof David Shallcross
Time commitment details
170 hours
Last updated: 14 March 2025
Further information
- Texts
- Related Handbook entries
This subject contributes to the following:
Type Name Specialisation (formal) Chemical with Business Informal specialisation Science-credited subjects - new generation B-SCI and B-ENG. Specialisation (formal) Chemical Specialisation (formal) Biochemical Breadth Track Chemical Engineering - Breadth options
- Available through the Community Access Program
About the Community Access Program (CAP)
This subject is available through the Community Access Program (also called Single Subject Studies) which allows you to enrol in single subjects offered by the University of Melbourne, without the commitment required to complete a whole degree.
Please note Single Subject Studies via Community Access Program is not available to student visa holders or applicants
Entry requirements including prerequisites may apply. Please refer to the CAP applications page for further information.
Additional information for this subject
Subject coordinator approval required
- Available to Study Abroad and/or Study Exchange Students
Last updated: 14 March 2025